Grain-systems Bin Accessories PNEG-104 Bedienungsanleitung PDF herunterladen

Figure #1

Vent Housing Assembly

(MIS-6778)

5/16" x 1.1/4"

Nuts & Bolts

Figure #2

Hold-Down

Angle

(MIS-4404)

Long Side

Approx.

15.7/8"

Short Side

Approx.

15.3/8"

ASSEMBLY

1. Take all parts out of the shipping box and check

if all parts are present.

2. Turn one (1) roof vent housing (MIS-6778) up-

side down. (See Figure #1)

3. Insert 5/16" x 1.1/4" bin bolt with neoprene

washer through hole in the side of the roof vent.

Place jamb nut onto the bolt and tighten. (See Fig-

ure #1).

4. Slide on eyelet of Grill Guard onto the 5/16" bin

bolt.

5. Insert 5/16" x 1.1/4" bin bolt with neoprene

washer through the other side of the roof vent,

through jamb nut and other eyelet of Grill Guard.

Tighten nut against vent housing side.)

Grill Guard

(MIS-6766)

The following instructions are for assembling and installing the Wire Grill Guard Roof Vent. First,

check the packing list to ensure all components have been shipped. The unit is easiest assembled in

the upside down position as shown in the instructions. Roof vent location should be as shown on

the reverse page.

Wire Grill Guard Roof Vent Assembly & Installation Instructions

WIRE GRILL GUARD ROOF VENT

6. Apply a bead of tube caulking around three(3)

housing sides of the roof vent where it meets the

holddown angle.

7. Place holddown angle (MIS-4404) on the as-

sembled roof vent. The wide end of the hole-down

angle must face vent discharge. Once aligned, screw

nine (9) #10 self drilling (S-280) screws through the

roof housing and into the holddown angle. (See Fig-

ure #2).

PNEG-104

Caulk with tube caulking

(Three sides of vent housing)

1 2

Inhaltsverzeichnis

Seite 1 - PNEG-104

Figure #1Vent Housing Assembly(MIS-6778)5/16" x 1.1/4"Nuts & BoltsFigure #2Hold-DownAngle(MIS-4404)Long SideApprox.15.7/8"Short Sid

Seite 2 - Installation

Figure #55/16" x 3/4" Nuts & Bolts(12 Required)Caulk with tube caulking(Three sides of vent housing)NOTE: Install bolts for thesetwo (2)

Kommentare zu diesen Handbüchern

Keine Kommentare

Grain-systems Bin Accessories PNEG-104 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Ausrüstung Grain-systems Bin Accessories PNEG-104 herunter. Grain Systems Bin Accessories PNEG-104 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung Grain-systems Bin Accessories PNEG-104